Slow Adoption, Faster Acceleration

Nikesh Mistry, Sector Head of Industrial Automation & Test and Measurement, GAMBICA, argues that the UK’s slow adoption of robotics might prove to be an advantage in disguise.

The UK has the lowest robot density in the G7. The most recent official figures, published by the International Federation of Robotics in its World Robotics 2025 report, put Western Europe at 267 robots per 10,000 employees and the EU-27 average at 231, against a global average of 132. The UK does not trouble that top table. Industrial robot installations here actually fell 35 per cent in 2024, and the pattern into 2025 has stayed cyclical rather than transformative.

Read as a scoreboard, that is a losing position. However, if we see it as a starting condition for the next phase of manufacturing, it could be closer to an opening.

The reason is timing. Germany’s 449 robots per 10,000 employees and Korea’s extraordinary 1,220 were built up over decades of fixed, hard-tooled automation, largely serving automotive and electronics lines. That installed base now must be upgraded or retrained to communicate to modern AI systems, and it is not necessarily quick nor cheap. The UK has far less of that legacy stock to work around.

Where the story now sits, into 2025 and Q1 2026, is not really about robot density at all; it is about what happens next, and there the picture looks considerably more competitive. North American robot orders held broadly flat in the first quarter of 2026, but collaborative robot orders rose 55.6 per cent in units and 78.2 per cent in revenue year on year, with the strongest growth outside automotive entirely, in life sciences, electronics and food.

That is a market shifting away from the fixed, high-volume automation the UK never fully built, and toward the flexible, software-defined systems a less burdened manufacturing base can adopt without a retrofit bill first.

On AI specifically, GAMBICA notes that Make UK’s most recent research, published this June, found that only 2 per cent of UK manufacturers describe AI as widely embedded in their operations, with just under 40 per cent using it in pockets and one in five not using it at all. Over half claim skills shortages, not cost or infrastructure, as the primary barrier. That is a genuine problem, and no amount of positive framing changes it. But it also means the constraint sitting between the UK and a more automated manufacturing base is a workforce and adoption confidence problem rather than a cost issue. This is definitely something we can rapidly influence and ties in with the government’s new industrial AI adoption plan.

The comparison with Europe and Asia should not be seen as a problem. Germany and Korea now have to retrofit their way toward the next generation of manufacturing. The UK, for once, gets to build straight into it.

The UK’s slow start on automation was never the disadvantage it appeared to be. Because we skipped the decades long build out of rigid, hard tooled robotics, we’re not carrying the downtime, cost and resource burden of upgrading legacy systems to talk to modern AI. That gap becomes a genuine head start, provided we accelerate hard from here. UK manufacturers can put that same time and capital straight into AI-native, software-defined production. Slow first, fast now, is a perfectly good position to be in, as long as we treat it as a springboard rather than an excuse.

Xhulio
Xhulio
Digital Content Manager

Related Articles

LATEST ISSUE

- Advertisements -BPI – Sell your replaced machinery at auction


FEATURED VIDEO

Latest News