In2Connect is the UK’s prime source for PCB and backplane, dsub, rectangular and multiway circular connectors; cable assemblies and wire harnesses and supply rectangular and circular connectors to the Manufacturing, Engineering, Process Control and Automation sectors.
Download our free Product Line Card from:
EN175301-803 (DIN 43650) solenoid connectors
Industry standard, 2 and 3 contact, panel and cable mounting, vibration proof, gasket-sealed screw lock connectors; IP 65 sealable Forms A, B and C with 18 mm, 10 mm, and 8 mm contact separations, respectively. Their black, grey or transparent body mouldings are suitable for ambient temperatures from -40 to + 125ºC and the screw type; snap-inserted, silver plated contacts are rated at 10 Amps. Right angled cable-mount models are available, with rewirable or overmoulded cable options in PVC and Polyurethane. Sockets are available with in-built electronic components in a host of protection circuit configurations; incorporating LED indicators, varistors, diodes rectifiers etc. for overvoltage protection.
Energy Saving DIN 43650 Connector
EN 175301-803 (previously DIN 43650) A/ISO 4400 – Energy saving square connectors. Reduction of energy consumption inside the valve by 60%, reduction of working temperature of valve/electrovalve, extension of valve life. T boost and temperature reduction customisable
EN175301-803 (DIN 43650) solenoid connectors ATEX
These connectors are ATEX 94/9/CE Approved with a PG9/PG11 cable entry and are suitable for use around the extreme conditions found in explosive environments. This mainly applies to gases that may be in the air that have the potential, but not the probability of, becoming explosive.
M8/M12 Circular sensor connectors
M12 connectors are rugged, compact, sealed connectors generally used for sensor/actuator connectivity in factory automation, process control, industrial instrumentation, and commercial electronics. The M12 style connector comes with a screw lock and has between 2 and 8 contacts. M12 connectors are IP67 rated and can be well suited for moisture-laden environments. Field attachable connectors have the freedom and flexibility to react to the cabling situation on site or to enable building your own M12 cables.
These M12 connectors may also be coded. The common used keyed types are:
A-Coded; used with Sensor Actuators
B-Coded; used with field buses
D-Coded; used with Industrial Ethernet
X-Coded; used with10 Gbps Ethernet
These connectors can be used to implement a flexible input-output (I/O) or field-bus connection on the circuit board. M12 connectors with D-coding comply with Industrial Ethernet standards (IEC 61067-2-101, Amendment 1). M12 connectors are now recommended for nearly all field-bus specifications, and meet the IP67 protection standards rating (IEC 61076-2-101). They are not intended for use under continuous pressure. In consideration of the broad range of ‘rained on’ definitions, the industry appears to have agreed to a ‘test of immersion for 30 minutes, at a depth of 1 metre, or the equivalent air test at 1.45 psi. As well as M12, In2Connect’s range of Sensor Actor Line connectors include M8, 7/8″, Rund24, M23, tooling and junction systems, adapters and splitter connectors.
*Male and female connectors over-moulded to PVC, PUR cables
*Male and female Field attachable connectors with screw, crimp or clamp terminations
*Male and female, front or back loading panel mount sockets
*Male and female, Surface mount (SMT) and Through hole (THR) sockets
*Male and female Panel plugs
*M12 Power connectors
*M12 High temperature connectors
*M8/M12 connectors for the Food and Beverage industries
*Connectors for Bus Systems
Industrial Ethernet 100MHz
10 Gbit/s Ethernet
RJ45 – M12x1 Conec EtherCord
CAN-Bus and IsoBus HDP
*X-coded M12x1 connectors designed for data transmission according to standard CAT 6A
*M8/M12 Junction systems
ATEX M8/M12 connectors
These M8 and M12 Eurostyle connectors are ATEX 94/9/CE Approved and are suitable for use around the extreme conditions found in explosive environments. This mainly applies to gases that may be in the air that have the potential, but not the probability of, becoming explosive. Connectors marked:
M8 ~ Ex II 2G IIC T6 Gb Ex IP 55/57
M12 ~ II 2G IIC T6 Gb II Ex 2D Ex tb IIIC T85°C Db IP65/IP67
Hermetic M12 connectors
Hermetically sealed M12 connectors from In2Connect are available as male receptacles with male eyelet, solder bucket and/or PCB contacts. Based on the M12 threaded coupling connector range these glass to metal sealed connectors have been designed and manufactured to meet customers’ stringent individual requirements for environmental, mechanical and mounting conditions and are are designed to exceed the mechanical and environmental requirements of IEC-61076-2-101 with fixed pin contacts, fused into a glass dielectric insert.