Thermal imaging can provide a fast overview of electrical installation conditions in many applications, with hotspots offering a good indicator of faults when performing comparative thermography. Dr Luke Nicholls, Technical Sales Manager at Quantum Design, outlines key considerations when selecting a thermography solution for electrical installation inspections.
Inspections of electrical installations often focus on detecting hotspots – areas with excessive temperatures. These can often be found by comparing the same kind of components and identifying different temperatures. For example, one phase can have a higher temperature than other phases due to poor insulation, which results in a creeping current. In many inspection situations, a comparative analysis called qualitative thermography is a suitable option.
Pixel count
To provide a clear conclusion in a qualitative thermography inspection, the infrared camera being used needs to come with an adequate resolution. Faults can only be identified by having a sufficient number of pixels.
When inspecting electrical installations, the geometrical resolution, which is the number of pixels available for measurement, should be a particular consideration. The more available pixels, the smaller the hotspots that can be detected from a certain distance and the earlier a developing fault can be discovered, resulting in a more secure inspection result.
Therefore, an infrared camera with a correspondingly large detector format does not determine average values from hotspot temperatures and lower ambient temperatures. Taking average readings would prevent the reliable detection of a hotspot.
Load
The load behaviour also plays a vital role in the thermographic analysis of electrical installations as temperature measurements are influenced by the load situation of electricalinstallations.
When thermographic measurements are done in low-load situations, hotspots will not be accurately detected as those areas will appear much colder than when the installation is running at full load. Therefore, either the measurements should be carried out at full load, or the measured lower temperatures can be converted to the temperatures that would be measured when running at full load.
Interchangeablelenses
Interchangeable lenses allow the flexible usage of infrared camera systems. Often, thermography is used for controlling high-voltage installations outdoors. To do those measurements correctly, full-signal telephoto lenses should be used to measure the smallest details. In contrast, limited space indoors could well result in the need to use wide-angle lenses for coverage of complete switchboards. The ability to change lenses offers the flexibility to adapt to changing applications as needed.
The InfraTecrange of thermography solutions available from Quantum Designs offers a number of advantages for qualitative thermography applications.
All interchangeable standard lens systems of the ImageIR series can be combined with a motor focus unit, which is controlled by the camera operating software. This enables precise, remote, and fast focusing. In addition, an autofocus function is available that operates reliably even with low image contrasts.
The very robust light metal housing is available with the protection degree IP67 and protects the camera against mechanical and thermal stress. In conjunction with protection degree preserving LEMO connectors, it is excellently suited for use in harsh industrial environments. Suitable protective housings are also available, e.g. made from stainless steel, which can optionally be equipped with a cooling and heating system.
InfaTec’s infrared cameras with cooled and uncooled detectors have native resolutions of up to (1,920 x 1,536) IR pixels. Spatially high-resolution thermograms ensure that components and assemblies are imaged down to the smallest detail and thus defects can be reliably detected and precisely localised.













