Primasonics acoustic cleaners

0

Primasonics acoustic cleaners solve the problems or material bridging, ratholing and cross contamination within silos.

Primasonics® Acoustic Cleaners are widely employed wherever ash, dust and powders are generated, processed, stored or transported. This range of acoustic cleaners has been of tremendous benefit in both preventing material hang-up and ensuring maximum, continuous material flow in silos and hoppers. Indeed, some of Primasonics most challenging but successful applications were within silos which contained dry materials such as cement. Primasonics have solved cement storage silo problems in over 40 countries worldwide.  The two main problem areas within hoppers and silos are:

  • Ratholing – where the material builds up on the sidewalls causing severely reduced “funnel flow”, which also restricts the silo being used to its full storage capacity.
  • Bridging – where the material bridges over the outlet area either severely restricting flow or stopping it completely.

Irrespective as to whether the cement bulk storage facility is under 500 kg or over 30,000 kg capacity Primasonics® Audiosonic™ Acoustic Cleaners have eliminated both of these problems and can even can help in preventing material cross contamination.

It is important to note and understand several main advantages that Acoustic Cleaners have over alternative methods, which have been employed to try and aid material flow. Primasonics Acoustic Cleaners operate at frequencies very much higher than the resonance frequency of steel, ceramic lining, concrete etc.  Therefore, Primasonics Acoustic Cleaners are guaranteed not to cause vibrational damage to any vessel or structure.  This is quite unlike vibrators, which by their very nature and method of installation, cause vibration and stress weaknesses within the vessel or structure to which they are attached.  The vibration resonances first have to pass through the vessel wall before reaching the material.  With the Acoustic Cleaner, the higher frequencies are directly absorbed into material giving 100% efficiency.

Air cannons/blasters seek to affect a very localised cure for a blockage problem, which has already occurred.  In many cases the air cannon simply “blows” a localised hole through the blockage, necessitating the installation of many air cannons within the general problem area.  It is generally true to say that one very rarely finds a single air cannon in effective operation.  This is totally the opposite with Primasonics Acoustic Cleaners but then we approach the problem with a totally different philosophy – by preventing the build up from occurring in the first place.

Acoustic cleaners are extremely simple in their operation, requiring only normal plant compressed air for their initial energy source.  Compressed air enters the Wave Generator and forces the only moving part, the ultra-high-grade titanium diaphragm to oscillate very rapidly within its specially designed housing.  These rapid oscillations create the base tone and the various different bell sections convert, amplify and distribute this base tone into a range of different key fundamental frequencies.

Primasonics® Audiosonic™ Acoustic Cleaners are aiding material flow from hoppers and silos in such diverse industries as Cement, Gypsum, Flour, MDF Wood Products, Ceramics, Chemicals, Petrochemicals and Power Plant. They are also employed in a range of ancillary plant such as filters, cyclones, fans, ductwork and steam/power generation plants.

sound@primasonics.com

www.primasonics.com

 

 

 

Share.

About Author

Comments are closed.