Versatile hand-hydraulic punch driver tools for round, square or rectangular knock-out holes are now available in the icotek range of products available from M Buttkereit Ltd. The tools, which incorporate a hand hydraulic punch driver, do not require any cumbersome hose connections and are capable of providing appropriate cut-outs for a wide range of cable entry system products.

The hydraulic punch drivers utilise special geometry punches which minimise both the cutting pressure and associated manual effort required for operation. The hydraulic cylinder incorporated with each punch driver can be rotated 360° on three axes, providing maximum tool versatility for operation in hard-to-reach or otherwise cramped working conditions.

The tool can be used to punch holes in stainless VA steel (up to 2mm thick), together with mild steel, aluminium or plastics up to 3mm sheet thickness. With a pilot hole of 10mm diameter, round knock-out punches are available for standard cut-outs PG16, M16, M20 and M25. With an M20/20.3mm diameter pilot hole, standard cut-outs to cover M32, M40, M50 and M63 sizes can be achieved. For the square/rectangular cut-outs, a pilot hole of M25/25.5mm diameter is required for which a standard punch tooling is available to cover two cut-out sizes of 46mm x either 46 or 112mm, together with 36mm x either 65, 86 or 112mm respectively.

Versatile hand-hydraulic punch driver tooling now available in the icotek cable entry system product range.

Individual box sets are available incorporating appropriate punches, dies and draw studs used either with a counter nut or spacer for the optional hand-hydraulic punch driver tools. The ease of application and operation of the hydraulic drivers is highly advantageous for multi-hole punching operations when compared to the more conventional fully manual operated wrench-style punches. In addition the self-centering round punches automatically split the scrap material slugs into three easily removed pieces which is more convenient and time saving on removal. In addition where the location holes being created are for the installation of round push buttons or switches, the icotek range offers a 22.5mm punch incorporating an integrated twist notch to prevent potential rotational movement of electrical components following their consistent manual operation.

Individual boxed set of icotek hand-hydraulic punch driver tools now available from M Buttkereit Ltd.

Individual boxed set of icotek hand-hydraulic punch driver tools now available from M Buttkereit Ltd.


Icotek latest round punch tool products which automatically split scrap material slugs into three pieces for easy removal.


Further information is available on request to:

M Buttkereit Ltd, Units 1 & 2, Britannia Road Industrial Estate, Sale, Cheshire M33 2AA

Telephone: 0161 969 5418                                   Fax: 0161 969 5419

e-mail: info@buttkereit.co.uk               www.buttkereit.co.uk



About Author

Comments are closed.