Anti-Static Labels Explained

CILS has seen a rise in enquiries from semiconductor and PCB manufacturers seeking labels that meet stringent anti-static requirements. Here, the industrial label specialist discusses the drivers behind this accelerating demand and explains the science behind static control and ESD protection.

Electrostatic charge can build up during manufacturing and assembly as materials come into contact, separate or move against one another. Labels are often overlooked when considering electrostatic discharge (ESD), yet they may be applied directly to equipment enclosures, PCBs or near sensitive electronic components. A conventional insulating label in the wrong location can retain surface charge, potentially increasing the risk of an ESD event.

What’s Accelerating Demand?

A significant driver is the miniaturisation of electronic components. As device geometries shrink, ESD design margins can become more constrained, while higher-speed interfaces can place additional demands on component-level ESD protection. This reinforces the importance of effective ESD control during manufacturing and handling.

Electronics manufacturers operate ESD control programmes, with requirements often extending through the supply chain. Quality frameworks such as ISO 9001 contribute indirectly through nonconformance management, cause analysis, corrective action and continual improvement.

Compliance is another consideration. Facilities operating under ANSI/ESD S20.20 must control electrostatic risks within ESD Protected Areas (EPAs), including materials that could generate or retain charge near ESD-sensitive items. Labels therefore form part of the wider ESD environment.

The Science of Static-Control Materials

Static-control materials help manage electrostatic charge. Conductive materials allow charge to move readily and equalise quickly when an appropriate conductive path is available, while static dissipative materials transfer charge more gradually, reducing the likelihood of rapid discharge.

Insulative materials have very high electrical resistance, which can leave charge localised on the surface. Their use near ESD-sensitive electronics therefore needs to be carefully assessed and controlled.

How to Know What Works?

ANSI/ESD STM11.11 is a recognised test method for measuring the surface resistance of planar materials used in static-control applications. For ESD-sensitive applications, manufacturers and procurement teams should look for test data showing how a label material performs under defined test and conditioning conditions.

Surface resistance, expressed in ohms, can help characterise whether a material provides suitable charge-dissipation properties for its intended application. Under established ESD guidance, static-dissipative materials generally have a surface resistance greater than or equal to 10⁴ ohms and less than 10¹¹ ohms when tested in accordance with ANSI/ESD STM11.11. The specification for a label will depend on its intended use and the wider ESD control environment.

CILS’ Solution

To combat risks posed by static charge, CILS 8900ESD labels are EOS/ESD S. 11.11 tested and feature a robust polyimide construction. They are IEC 61340, ANSI/ESD S20.20 and ANSI/ESD S541 compliant, and resist abrasion, frequent handling, extreme temperatures, industrial solvents and chemicals (MIL-STD-202G, Notice 12, Method 215K & MIL-STD-883E, Notice 4 and Method 2015.13), providing a durable solution for demanding ESD-sensitive manufacturing environments.

Xhulio
Xhulio
Digital Content Manager

Related Articles

LATEST ISSUE

- Advertisements -BPI – Sell your replaced machinery at auction


FEATURED VIDEO

Latest News