Silverson Machines has recently added more 30 second mixing guides to their series of ‘Shorts’ available on the Silverson YouTube channel. These videos quickly demonstrate common mixing problems in a range of applications across food, cosmetics and chemicals.
One of the first ‘shorts’ to launch was a 30 second guide on Mixing Xanthan Gum, which now has over 85,000 views. Many food applications rely on the properties of gums and thickening agents such as xanthan gum, pectin, or CMC (also available in the 30 second series) to give the end product the characteristics the manufacturer desires. Gums such as these provide stability and can improve the “mouth feel” and texture of the end product. However, they can cause a number of problems during the manufacturing process and can be difficult to disperse and hydrate correctly and efficiently.
As highlighted in the mixing guide, one of the most common problems with processing Xanthan gum is the formation of agglomerates when the gum is added to liquid. These agglomerates make it difficult to obtain full yield, resulting in poor quality and inconsistency between batches. Traditional agitators struggle to effectively disperse these agglomerates, as they merely wash the surface, prolonging the hydration process and requiring extensive mixing times. As a result, many formulations contain unnecessarily high levels of gums to compensate for the poor yield, which increases raw material costs.
In the 30 second mixing guide the difference in performance between conventional mixers and High Shear mixers is clearly demonstrated for the viewer. Silverson high shear mixers utilise specialised rotor/stator technology to generate extremely high shear rates, creating a powerful suction effect that continuously draws materials into the high shear zone. This high shear action swiftly disperses powders, disintegrate agglomerates and expose a large surface area to the surrounding liquid, resulting in a uniform, agglomerate-free solution.
In another of the 30 second guides, Silverson explain how their high shear mixers can be used to manufacture Mayonnaise on a small and large scale.
The mixing equipment used for the manufacturing process has a significant impact on the quality of the finished product. The challenge comes from needing a mixer that can complete several mixing processes. For example, mayonnaise is an oil-in-water emulsion, so the mixer must be able to form a stable emulsion, but it must also be able to maintain movement in the vessel during oil addition when the viscosity begins to increase. Oil addition must be controlled because if it is added too quickly this can cause the emulsion to break. In low-fat formulations where gums and thickeners such as starches are added to enhance mouthfeel, the mixer needs to incorporate and hydrate these ingredients without forming agglomerates. These tasks are beyond the capabilities of conventional mixing equipment such as agitators or stirrers.
The Silverson Mayonnaise plant can carry out the entire mayonnaise manufacturing process. The egg (either powder or liquid) is added to the vessel and is rapidly wetted out and dispersed. The Mayonnaise plant uses a separate hopper for oil addition and when the oil feed valve is opened, oil is drawn down from this hopper into the aqueous phase at a controlled rate. The aqueous and oil phase ingredients pass directly into the workhead of the In-Line mixer, where they are subjected to intense high shear. This finely disperses the oil into the aqueous phase, immediately forming an emulsion.
As well as Mayonnaise, Silverson High Shear mixers can also be used for the production of other sauces including Hummus, on which there is another 30 second mixing guide.
To see how Silverson high shear mixers overcome these and other challenges, visit the Silverson YouTube channel.
youtube.com/@silversonmachines












